HOMEOWNER QUESTIONS · 04 / 08

Flooring installation questions, answered

Compare flooring by material, preparation and total installed scope. These answers explain current Dream Space planning rates and the details that can change a flooring project.

Dream Space Remodeling · Updated November 21, 2026

Prices are planning estimates for the stated scope. Your written proposal confirms measurements, selections, exclusions and project terms.

How much does it cost to install vinyl plank flooring?

Our LVP installation reference is $5.075 per floor sq ft. For 500 sq ft, that is $2,537.50 before selected removal, preparation or trim, with a $700 base flooring minimum. Labor and applicable construction consumables are included; the flooring product is a separate purchase. The base assumes a ready subfloor. You may buy flooring directly or have Dream Space source and purchase it under a separate agreement. Confirm the product and installation method before relying on a planning total.

How do Standard, Mid and Luxury flooring tiers work?

In the estimator, flooring tiers select the installation type: Standard is laminate at $4.375 per floor sq ft, Mid is LVP at $5.075, and Luxury is prefinished hardwood at $8.75. They are not three grades of the same product. Labor and applicable construction consumables are included; flooring purchases are separate. Review the exact product, subfloor, moisture conditions and installation method before choosing.

Is flooring priced by room area or by the material ordered?

Measure the floor area to be installed, then establish product order quantity separately. Cuts, layout and the selected product affect waste, so confirm the order with the installer before purchasing. Do not automatically add an ordering waste percentage to the installation area. Note closets and transitions and list stairs separately. Our measurement guide explains a useful room-by-room list.

REAL DREAM SPACE PROJECT PHOTOGRAPHS

See how the living space changed

Use these views to compare the changed floor alongside the walls, trim and staircase. Photographs show the visible result; inspect the existing floor and substrate before deciding what preparation your home needs. Open the project story to explore the full renovation.

Before

Before: carpet, paneled walls and the original living-room finishes.
Before: carpet, paneled walls and the original living-room finishes.

After

After: light flooring, painted walls, white trim and staircase finishes.
After: light flooring, painted walls, white trim and staircase finishes.

Compare planning prices and inclusions · Discuss your interior project with us

Project photographs show completed work. The planning prices in this guide are examples for defined scopes, not the price of the photographed project.

Are old-floor removal, leveling and baseboards included?

The base installation references assume a ready subfloor. Carpet or floating-floor removal is $0.875 per sq ft for the stated removal scope. Light patching, leveling, tile removal, trim and stairs require their own defined scope. Quarter-round installation differs from replacing baseboards, and trim purchases are separate. Ask for removal, disposal, preparation and trim to be listed so the complete installation and purchase costs are clear.

Can new flooring go over the existing floor?

Sometimes, when the selected product permits it and the existing surface satisfies the required condition, stability and flatness criteria. Layers also affect doors, appliances and transitions to adjoining rooms. Do not assume a loose floor, soft surface or damaged layer is a suitable base. Have the existing assembly checked against the new product’s instructions. If removal is necessary, include that work and any resulting subfloor repairs in the proposal.

Does LVP need an underlayment or moisture barrier?

It depends on the exact product and substrate. Some floors have an attached pad, and adding an unapproved underlayment can affect performance. Concrete or other conditions may call for a manufacturer-approved vapor-control approach. There is no universal extra layer suitable for every LVP. Follow the current instructions for the chosen product; Shaw’s guidance also distinguishes product-specific installation and underlayment requirements.

Can every hardwood floor be sanded and refinished?

No. Remaining wood thickness, previous sanding, damage and the floor’s construction determine suitability. Engineered wood has a different wear-layer limit from solid wood. Our refinishing labor reference is $3.325 per sq ft, subject to inspection; selected stain and finish purchases are separate. Deep stains or movement may remain or require repairs. Read our refinish-or-replace guide before deciding from photographs alone.

Should I refinish hardwood or replace it with LVP?

Consider the existing floor’s condition, the room’s use, the finish you want and the complete project scope. Refinishing may preserve serviceable wood, while replacement may suit a different appearance or an unsuitable existing floor. Compare repairs, furniture moving, transitions and the time the room will be unavailable. Our published rates provide a starting comparison, but neither rate establishes whether your current floor is a good candidate for refinishing.

When should flooring be installed during a kitchen remodel?

Coordinate the floor, cabinetry and appliance plan before construction. Some floating-floor systems need room to move and should not be trapped under fixed installations; requirements vary by product. Finished heights also affect dishwashers and transitions. The installer should follow the selected floor’s instructions and coordinate with cabinet installation. This is a reason to choose the product early rather than deciding the sequence from appearance alone.

How do I compare flooring installation quotes?

Compare the same installation area, product specifications, demolition, disposal, subfloor preparation, transitions, trim and furniture responsibilities. Identify separate finish purchases, door adjustments and stairs. Confirm how additional preparation discovered after removal will be assessed. A per-square-foot figure is useful only when the included work is clear. Use the instant estimator and follow up for a site-specific written proposal.

Let’s plan your flooring.

Share your town, room measurements, photos and priorities. We’ll discuss the work needed and the next step toward a written proposal.

Call 215-820-7243 · Based in Chalfont, serving Bucks and Montgomery counties. See service areas.

Scroll to Top