Remodeling Costs in Bucks & Montgomery County, PA

Clear prices. Defined work. Decisions you can understand.

See your planning price in our instant estimator. The kitchen, bathroom and basement examples below use the Mid installation scope. For the same reference size, Standard is $2,450 lower and Luxury starts $2,800 higher. These levels describe installation complexity, not product-purchase allowances. Flooring prices depend on the installation method; painting prices depend on the wall preparation. Optional work is separate.

Planning a remodel should begin with useful information. Dream Space Remodeling shares estimated prices for basement finishing, kitchen remodeling, bathroom renovation, flooring and painting in Bucks County and Montgomery County, PA. You can see the work each estimate assumes before requesting a proposal.

We are a family-owned remodeling company based in Chalfont. Our goal is straightforward: explain what you are paying for, identify what is outside the scope, and discuss changes before additional work proceeds.

These are planning estimates for the stated work. Labor and construction materials for the stated work are included. Finish purchases are separate: you may buy them directly, or we can help source and purchase them under a separate agreement. Measurements, selections, site conditions and any required approvals are reviewed before your written proposal confirms the work and price. All examples below are before any eligible code discount.

Request a written remodeling estimate · Explore our remodeling projects · Find your service area

Basement finishing cost in Bucks County, PA

An unfinished basement can become a family room, home office or flexible gathering space. These estimates cover open-plan finishing in a dry, accessible basement with adequate existing utilities.

800 sq ft basement: $19,530 estimated.
1,200 sq ft basement: $25,130 estimated.
1,600 sq ft basement: $30,730 estimated.

The base scope assumes a dry, accessible basement with adequate existing utilities. It includes standard framing and insulation, drywall walls and ceiling, basic electrical work, lighting installation within the base scope, flooring and trim installation, painting labor, coordination and cleanup. Flooring, trim, finish paint, light fixtures and any cabinetry, countertops, appliances or bathroom finish items are separate purchases. HVAC upgrades, structural repairs, egress work and drainage are outside this estimate.

What does adding a basement bathroom, kitchenette or bar cost?

Full bathroom installation: add $8,750. Installation for a 40 sq ft bathroom with one shower, toilet and vanity, assuming usable nearby plumbing rough-ins. Finish purchases are separate. A new sewage ejector, extensive concrete cutting or long drain runs require separate pricing.

Kitchenette installation: add $8,050. Installation for eight linear feet of cabinets, countertop and sink with suitable nearby connections. Those products and any appliances are separate purchases. Major utility upgrades are excluded.

Dry bar installation: add $3,150. Installation for six linear feet of cabinets and countertop; product purchases are separate. No sink, plumbing or appliances are included.

Example: 1,200 sq ft basement ($25,130) + full bathroom ($8,750) + dry bar ($3,150) = $37,030 estimated. The added rooms occupy the stated basement area; they do not increase the finished square footage.

Explore basement remodeling · Prepare with our basement finishing checklist

Kitchen remodeling prices in Bucks and Montgomery counties

The base scope is replacement within the existing layout: cabinet and countertop installation within the reference quantities, sink and faucet installation, simple backsplash and flooring installation, minor electrical and plumbing connections, painting labor and cleanup. Cabinets, countertops, sink, faucet, backsplash tile, flooring, light fixtures, trim, finish paint and appliances are separate purchases. Structural wall changes and utility service upgrades are excluded.

10 × 12 ft kitchen: $17,430 estimated. Installation for 15 linear feet of cabinets and 30 sq ft of countertops.
12 × 14 ft kitchen: $23,030 estimated. Installation for 20 linear feet of cabinets and 40 sq ft of countertops.
14 × 18 ft kitchen: $30,030 estimated. Installation for 25 linear feet of cabinets and 50 sq ft of countertops. Cabinet and countertop purchases are separate.

Optional estimated additions: $3,150 for installation of a six-foot cabinet island and countertop without plumbing; $1,540 for installation of one tall pantry cabinet. Product purchases are separate. Layout changes and appliance connection relocations need their own scope review.

Keeping plumbing locations and selecting standard cabinet sizes can help control your kitchen renovation budget. Room dimensions alone do not determine the cabinet quantity, so we measure the actual layout before quoting. See our kitchen remodeling service or learn how to compare kitchen estimates.

Bathroom remodeling costs with a defined scope

40 sq ft bathroom: $9,730 estimated.
60 sq ft bathroom: $12,530 estimated.
100 sq ft primary bathroom: $17,430 estimated.

The base scope assumes the existing footprint and includes demolition, substrate preparation, waterproofing, tile installation, toilet and single-vanity installation, fixture and exhaust-fan installation, painting labor and cleanup. One shower or tub/shower combination is included in the installation scope. Tile, vanity, countertop, toilet, fixtures, shower glass, exhaust fan, lighting, trim and finish paint are separate purchases. A separate tub and shower, structural changes and major concealed damage are excluded.

Estimated upgrades include $1,260 for double-vanity installation in place of the single-vanity installation, $315 for one standard shower niche and $1,260 for heated bathroom flooring work. Vanity and selected finish-product purchases are separate. Plumbing relocation needs its own scope review.

Explore bathroom remodeling · Plan your bathroom renovation

Flooring installation and hardwood refinishing prices

LVP installation: $5.075 per floor sq ft.
Laminate installation: $4.375 per floor sq ft.
Prefinished hardwood installation: $8.75 per floor sq ft.
Hardwood refinishing labor: $3.325 per floor sq ft. Includes applicable construction consumables; new flooring and selected finish products are separate purchases. Refinishing depends on sufficient remaining wood thickness.

Installation assumes a ready subfloor and includes standard cleanup. The base flooring service minimum is $700. For example, 500 sq ft of LVP installation estimates at $2,537.50 for labor and construction materials, before optional preparation or trim and before the flooring purchase. Rates retain three decimal places where needed so the calculation matches the estimator.

Carpet or floating-floor removal is estimated at $0.875 per sq ft. Patching, trim work and stair refinishing need a defined scope and written price. Tile removal, major leveling, new stairs and railing replacement are separate.

Old floors are assessed before sanding. Refinishing cannot guarantee removal of every deep stain, dent or uneven area. Explore flooring and hardwood refinishing or compare refinishing with replacement.

Interior and exterior painting prices

Mid preparation, interior walls: $1.575 per paintable wall sq ft. Minor spot preparation and labor for two finish coats, with a $525 base service minimum. Finish paint is a separate purchase. Standard light-touch-up preparation and exterior work need a tailored written estimate. Trim, major repairs, access equipment and hazardous-paint remediation are separate.

Measure the surface being painted, not the floor area. A 12 × 15 ft room with eight-foot walls has 432 sq ft of gross wall area before subtracting openings. At $1.575 per sq ft, the Mid preparation and painting labor estimate is $680.40. Finish paint is separate.

Optional interior work: ceiling painting labor at $1.225 per ceiling sq ft; door painting labor at $59.50 each. Luxury preparation adds full-wall skim coating at $1.925 per wall sq ft to the painting scope. Finish paint is separate. Trim work and repairs outside the selected preparation need a written scope and price.

The agreed preparation matters as much as the color. We distinguish minor patching from full skim coating so you can compare the same scope. Learn about interior and exterior painting.

Whole-home remodeling: add the work you actually need

A whole-home estimate combines defined rooms and additional measured work. Flooring and painting already included in a selected kitchen, bathroom or basement package should not be counted again. Additional areas outside those rooms are measured separately.

For example, a 10 × 12 ft kitchen ($17,430), a 40 sq ft bathroom ($9,730), and 500 sq ft of LVP in other rooms ($2,537.50) total $29,697.50 estimated. This is a selected-scope renovation, not a complete structural gut remodel.

Stairs, lighting, plumbing changes and waterproofing are reviewed as separate scopes when needed. Explore whole-home remodeling and use our project planner to organize your priorities.

How we keep your remodeling estimate clear

You can see the scope before you decide

Your written proposal defines the rooms, installation work, construction materials, separate finish purchases, exclusions and payment schedule. Ask us to clarify anything before accepting it. If we source and purchase finishes for you, confirm that separate agreement and budget before ordering.

Changes should be documented

If you request a different product or additional work, the revised scope, price and scheduling effect should be documented for your approval before that additional work proceeds. The same approach applies when concealed conditions require a change to the agreed plan.

Existing conditions are discussed openly

A wall or floor can hide damage that is not visible during the initial visit. We explain what can be assessed at the walkthrough and what remains uncertain. Transparent pricing means explaining those limits rather than pretending every house has identical conditions.

Compare complete proposals

Compare installation quantities, finish-purchase budgets, surface preparation, disposal, permits and exclusions alongside the total. A lower price with less work included may not match the project you have in mind. Browse our project portfolio and ask about work relevant to your home.

Remodeling pricing questions

Are these fixed quotes?

No. Each figure is one estimated price for the described scope. Your written proposal confirms the actual work and price after measurements, selections and site review.

Are materials and labor included?

Labor and construction materials for the stated work are included. Finish purchases are separate: you may buy them directly, or we can help source and purchase them under a separate agreement. Installation of an item and purchase of that item are different costs. Review the written scope to see which installation work is included and which extras are separate.

Why can two same-size projects cost different amounts?

Preparation, access, utilities, layout and material selections can differ even when the floor area is the same. A basement with usable bathroom rough-ins is a different scope from one that needs a new drainage system.

Does requesting an estimate commit me to construction?

Submitting the form starts a conversation about your project. A construction agreement, payment schedule and any appointment arrangements are handled separately.

Request a local remodeling estimate

Dream Space Remodeling serves Chalfont, Doylestown, Warrington, Jamison, New Britain, Feasterville, Warminster, Newtown, Montgomeryville, Lansdale, Yardley and North Wales. Check our service areas and tell us where your project is located.

Send your town, approximate dimensions, photos if available, and your main priorities. We can then review the work needed to prepare a defined proposal.

Request your personalized estimate or call 215-820-7243. More questions? Visit our remodeling FAQ or explore 80 detailed homeowner questions and answers about kitchens, bathrooms, basements, flooring, painting and project planning.

Planning prices and purchase exclusions updated November 20, 2026 to match the current estimator. These are defined-scope estimates, confirmed in your written proposal.

Scroll to Top